Configuration and administration
56
Administration from a web server
The complete administration of the optiPoint 300 basic is only
available from the web server. The telephone is temporarily locked
when the changed data from the web server are transmitted. If you
press a key or lift the handset in this phase you will hear a negative
acknowledgement signal.
If the time for transmitting exceeds a certain period you will see
three dashes scrolling across the display, from left to right.
You can only transmit the changed data from the web server if the
telephone is in idle mode. Otherwise you will get a corresponding
error message from the web server.
If the web server initializes diagnostics, you can see the corre-
sponding displays on the telephone. The optiPoint 300 basic is
locked for incoming calls during this period – a caller will hear the
busy signal. After the diagnostics period, the telephone goes back
into idle mode.
Please refer to chapter "The web pages" on page 64 for more de-
tailed informations.
– – –
Summary of Contents for optiPoint 300 basic
