Siemens optiPoint 300 basic, Operation And Andministration Manual

Page: 54 / 90

Configuration and administration
54
SNTP server IP address
You must specify the IP address of the server that will be used to
synchronise date and time information.
Time zone offset
The SNTP server's universal time information can be adapted for
your local time zone. To do this, you must program your unit for an
offset ahead or back the required number of hours.
You can enter any offset setting between -12 and 12 hours. A neg-
ative value means that your local time is earlier than universal
time, a positive value means that it is later.
5F – _
Service mode
5F – 211
Select SNTP setting
?
Confirm
P6 244 189 012 245
Change server's IP
address
?
Save change
5F – _
Service mode
5F – 212
Select time zone offset
?
Confirm
5F – 212 07
Change offset setting
?
Save change
You can enter
- a negative value by pressing the
-
key
- a positive value by pressing the
+
key.