Siemens MOBIC T8 for Windows CE 3.0, Manual

Page: 96 / 153

Supplied Programs and Tools
7-9
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Note
Each modification to the trace archive made in the MOBIC Configurator is only
entered in the registry after you tap the “Apply” button. You can restore the default
values for the trace archive by simply tapping on the “Set Default Settings” button
and then tapping on the “Apply” button.
Trace ON/OFF
Using this global trace flag, you can deactivate all trace output (“Trace OFF” option
button) or activate them “Trace ON” option button).
If trace output is deactivated with the trace flag, no trace outputs are written to the
trace archive regardless of the trace level of individual programs.
If trace output is activated, the trace output depends on the local trace levels of the
individual programs (see below).
To activate the trace flag, select the “Trace ON” option button, to deactivate it,
select the “Trace OFF” option button.
Default setting: Trace OFF
Trace Output
If you select the “Trace to File” check box and/or “Trace to COM”, you specify
whether the trace output is written to a file and/or output via the COM interfaces.
You can also set the baud rate of the COM interface with which the trace output is
made. You can select (9600, 19200, 57600 or 115200) in the list box.
Default settings: Trace to File (Trace Output)
8 data bits, no parity, 1 stop bit, no handshake
115200 (baud rate)
Trace Archive Path
Here, you can change the path for the trace archive.
Default setting: \Windows\Logfiles