Siemens MOBIC T8 for Windows CE 3.0, Manual

Page: 3 / 153

iii
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Safety Instructions Regarding your Product:
Before you use the product described here, read the safety instructions below thoroughly.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and sy-
stems in accordance with established safety practices and standards.
Correct Usage of Hardware Products
Note the following:
!
Warning
This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers which
have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correct-
ly, and operated and maintained as recommended.
Before you use the supplied sample programs or programs you have written yourself, make certain that
no injury to persons nor damage to equipment can result in your plant or process.
EU Directive: Do not start up until you have established that the machine on which you intend to run this
component complies with the directive 89/392/EEC.
Correct Usage of Software Products
Note the following:
!
Warning
This software may only be used for the applications described in the catalog or the technical description,
and only in connection with software products, devices, or components from other manufacturers which
have been approved or recommended by Siemens.
Before you use the supplied sample programs or programs you have written yourself, make certain that
no injury to persons nor damage to equipment can result in your plant or process.
We have checked the contents of this manual for agreement with the hardwa-
re and software described. Since deviations cannot be precluded entirely, we
cannot guarantee full agreement. However, the data in this manual are revie-
wed regularly and any necessary corrections included in subsequent edi-
tions. Suggestions for improvement are welcomed.
Disclaimer of Liability Copyright
E
Siemens AG 2003 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.
Siemens AG
Bereich Automatisierungstechnik
Geschäftsgebiet Industrie-Automatisierung
Postfach 4848, D-90327 Nürnberg
Subject to technical change.
Siemens Aktiengesellschaft G79000- G8976- C190- 02