Siemens MOBIC T8 for Windows CE 3.0 Manual Download Page 27

Page: 27 / 153

Design and Functional Elements

2-4

MOBIC T8 for Windows CE 3.0

C79000-G8976-C190-02

Ports under the Protective Cover

USB Port
For connecting USB-compatible devices (Universal Serial Bus). Note that only
USB devices with Windows CE 3.0-compatible drivers can be connected. The
MOBIC already has a driver for keyboard and mouse.

PCMCIA (under the protective cover)
External PCMCIA slot, for example for connecting a barcode reader.

Ethernet (RJ-45)
For direct attachment to existing Ethernet networks.

Power Supply Connector
Used to connect the shipped power supply unit.

Summary of Contents for MOBIC T8 for Windows CE 3.0


























































































































































Search results

Summary of Contents for MOBIC T8 for Windows CE 3.0

Reviews:

Related manuals for MOBIC T8 for Windows CE 3.0

Brands by name

Popular brands

Siemens MOBIC T8 for Windows CE 3.0, Manual

Search results

Summary of Contents for MOBIC T8 for Windows CE 3.0

Reviews:

Related manuals for MOBIC T8 for Windows CE 3.0

Brands by name

Popular brands