Siemens MOBIC T8 for Windows CE 3.0 Manual Download Page 69

Page: 69 / 153

Ports

4-14

MOBIC T8 for Windows CE 3.0

C79000-G8976-C190-02

4.8

Power Supply Unit

Location

The connector for connecting the external power supply unit to your MOBIC is
located on the top of the device under the protective cover (see Figure 4-9).

Power supply
connector

Figure 4-9

MOBIC with Connected Power Supply Unit

Class of Protection

Caution

The power supply connector does not comply with class of protection IP65.

Connecting the Power Supply Unit

To connect the power supply unit and the main power supply cable (UK, US, EU)
to your MOBIC and to a power outlet, follow the steps below:

1. Remove the protective cover from the top of the unit.

2. Connect the power supply unit to the MOBIC.

3. Connect the main power cable to the power supply unit.

4. Plug the power cable into a socket.

Summary of Contents for MOBIC T8 for Windows CE 3.0


























































































































































Search results

Summary of Contents for MOBIC T8 for Windows CE 3.0

Reviews:

Related manuals for MOBIC T8 for Windows CE 3.0

Brands by name

Popular brands

Siemens MOBIC T8 for Windows CE 3.0, Manual

Search results

Summary of Contents for MOBIC T8 for Windows CE 3.0

Reviews:

Related manuals for MOBIC T8 for Windows CE 3.0

Brands by name

Popular brands