Siemens MOBIC T8 for Windows CE 3.0, Manual

Page: 76 / 153

Data Exchange
6-4
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
6.2.1 Installation
1. Insert the MOBIC CD in the CD-ROM drive of the host computer.
2. Start the Setup.exe in the \ActiveSync folder of the MOBIC CD.
3. Follow the instructions on the screen until you arrive at the “Get Connected“
dialog.
4. Now connect the MOBIC to your host computer via the serial cable and turn on
the MOBIC.
5. You can now continue to follow the instructions of the installation routine on the
host computer.
The MOBIC has now been detected and you can establish the partnership.
6. In the “Set Up a Partnership” dialog, select “Yes” to specify the partnership.
7. Follow the instructions on the screen until the installation is completed.
After successful installation of the program, you will find additional information on
using ActiveSync in the ActiveSync help on your host computer.
After installing ActiveSync, you will see an icon in the status bar of your host
computer (see Figure 6-1) that displays the status of the connection to your
MOBIC.
Icon
Shows the status of the connection on the host computer
to the MOBIC
Green = connected
Gray = not connected
Figure 6-1 Status of the Connection to the MOBIC