Siemens micromaster 410, Operating Instructions Manual, Page: 38 / 84

3 Commissioning Issue 04/02
MICROMASTER 410 Operating Instructions
38
6SE6400-5EA00-0BP0
Changing parameters with the Operator Panel
The procedure for changing the value of parameter P0004 is described below.
Modifying the value of an indexed parameter is illustrated using the example of
P2011. Follow exactly the same procedure to alter other parameters that you wish
to set via the OP.
Changing P0004 – parameter filter function
Step Result on display
1
Press to access parameters
2
Press until P0004 is displayed
3
Press to access the parameter value level
4
Press or
to the required value
5
Press to confirm and store the value
6 Only the motor parameters are visible to the user.
Changing P2011 an indexed parameter
Setting USS address
Step Result on display
1
Press to access parameters
2
Press until P2011 is displayed
3
Press to access the parameter value level
4
Press to display current set value
5
Press or
to the required value
6
Press to confirm and store the value
7
Press
until r0000 is displayed
8
Press to return the display to the standard
drive display (as defined by the customer)
Figure 3-6 Changing parameters via the OP