manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 67 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 67

CAUTION

Dockable patient table may move against the wall or the
door!

Possible injuries (for example, squashed fingers)

◆

To move the table, always grasp the middle area of the
handle (not the outside edges).

4

Move the table with the handle at the foot end of the table.

If the dockable patient table is not in use, make sure not to move
it to the back of the magnet.

✓

Guiding wheel is activated.

✓

Side rails are lowered.

CAUTION

Points of injury during docking of the table!

Damage to the system, injury to the patient

◆

Ensure that the patient’s hair, parts of the body, or items of
clothing do not get caught between the table and the system.

1

Use the table‘s momentum (to save strength) and move the table
into the docking station.

Docking the table

MR system components

3

MAGNETOM Skyra

fit

 | syngo MR E11

67

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments