Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 13 | Manualshive

Page: 13 / 131

Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 13

Authorized operating personnel

The MAGNETOM MR system must be operated according to the
intended use and only by qualified persons with the necessary
knowledge in accordance with country-specific regulations, e.g.
physicians, trained radiological technicians or technologists,
subsequent to the necessary user training.

This user training must include basics in MR technology as well as
safe handling of MR systems. The user must be familiar with potential
hazard and safety guidelines the same way the user is familiar with
emergency and rescue scenarios. In addition, the user has to have
read and understood the contents of the operator manual.

Please contact Siemens Service for more information on available
training options and suggested duration and frequency of such
training.

Definitions of different persons

Term used

Explanation

User/Operator/
Operating per-
sonnel

Person who operates the system or software,
takes care of the patient or reads images

Typically physicians, trained radiological techni-
cians, or technologists

System owner

Person who is responsible for the MR environ-
ment. This includes legal requirements, emer-
gency plans, employee information and qualifica-
tions, as well as maintenance/repair.

MR worker

Person who works within the controlled access
area or MR environment

User/Operator as well as further personnel (for
example, cleaning staff, facility manager, service
personnel)

1.4

1.4.1

Introduction

1

MAGNETOM Skyra

fit

| syngo MR E11

13

Print No. M6-04401.621.02.02.02

«
...
11
12
13
14
15
...
»

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments