Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 16

Page: 16 / 131

Configuration of hazard hints

All hazard hints are identified in a special way. The following
keywords signal the level of hazard involved:

WARNING

Warning regarding risks that may result in
death or serious physical injury.

CAUTION

Warning regarding risks that may result in
minor physical injury or material damage.

Example:



WARNING

Source of danger!

Consequences

◆

Countermeasure.

Common/permanently existing hazards

The frequency at which the potential hazards mentioned in this
section lead to accidents is still too high. Therefore, it is especially
important to observe the instructions on how to avoid these
dangerous situations.

The most significant hazards include:

◾

Electromagnetic fields

◾

Contraindications

◾

Mechanical hazards

◾

Incompatible devices

Electromagnetic fields

In the examination room, there are different kinds of electro-
magnetic fields and the resulting risks.

2.1.4

2.2

2.2.1

Safety

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews:

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 16 / 131

Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews: