manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 36 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 36

CAUTION

Spatial non-linearity of the gradient field and inhomogeneity of
the static magnetic field!

Pin-cushion and barrel-shaped distortions and/or loss of
signal in the margins of the MR image

◆

Go through a distortion correction.

◆

Position the region to be examined as close to the magnet
isocenter as possible.

◆

Use phantoms for the control measurements.

CAUTION

Incorrect localization data due to spatial non-linearity of the
gradient field and inhomogeneity of the static magnetic field!

Incorrect stereotactic planning or breast biopsy

◆

Take localization errors into account while planning
stereotactic interventions or breast biopsies.

CAUTION

Distorted slice edges in the margin due to spatial non-linearity of
the gradient field and inhomogeneity of the static magnetic
field!

Incorrect stereotactic planning

◆

When planning stereotactic interventions, take into account
slice distortion at the margins of the MR image. This applies in
particular to graphic slice positioning (GSP) as well as other
graphic slice displays and slice positioning data independent
of the possible use of distortion correction.

Distortions/signal obliteration

along the edges

Localization errors due to

distortion

Potato chip artifact

2

Safety

36

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments