manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 43 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 43

After the Magnet Stop switch has been pressed, an alarm is triggered
at the alarm box. The WARNING LED will light up and an alarm signal
will sound.

As a rule, Siemens Service must be called following a quench.
The magnet must only be put back into operation by Siemens
Service personnel.

WARNING

Formation of droplets due to condensation during quenching!

Personal injury

Risk of fire

◆

Do not touch the exhaust line.

◆

Do not stand under the exhaust line.

◆

Avoid open flames and do not smoke.

WARNING

System indicates Magnet Stop error!

Hazardous conditions because the magnet cannot be
quenched in case of emergency

◆

Immediately remove the patient from the magnet.

◆

Restrict the access to the examination room.

◆

Notify Siemens Service.

Safety

2

MAGNETOM Skyra

fit

 | syngo MR E11

43

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments