Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 55

Page: 55 / 131

Depending on the situation, the small jogwheel can have different
functions:

◾

Rotate: e.g. for navigating through the display menu or for
changing settings of, for example, ventilation

◾

Push: e.g. for resetting the patient alert or for starting a
measurement



Alternatively, use the intercom to reset the patient alert or to
change the volume settings of the headphones and
loudspeakers.

The optional control units at the back of the magnet additionally
comprise a Table Stop button.

The Dot (Day Optimized Throughput) display provides status
information as well as several tools.

The display is located above the magnet bore opening at the front of
the magnet cover. Optionally, at the back of the magnet, a second
display can be installed for the additional control unit.

The display shows several pieces of information:

◾

Information concerning patient positioning (e.g. patient
orientation, current table position, auto-positioning)

◾

Information about the connected coils

Dot display

Information service

MR system components

MAGNETOM Skyra

fit

| syngo MR E11

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews:

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 55 / 131

Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews: