manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 60 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 60

(1) Table Up/Inward button

(2) Jogwheel, Center Position button

(3) Home Position button

(4) Table Down/Outward button

To operate the patient table safely and efficiently, operating
personnel must be familiar with its most important positions.

Home Position

Table is at the height of moving into the magnet bore, tabletop is
moved completely out of the magnet

Last Scan Position

If the tabletop was moved only in the horizontal direction, the tab-
letop can be returned into the position of the last measurement

Default Position

The center of the Head/Neck 20 is in the magnet isocenter

Center Position

The body region to be measured is in the magnet isocenter

Relative Position

Distance between the slice marked with the light localizer and the
magnet isocenter

For interventional examinations, a table lock function is available via
the Dot display. (

 Page 55 Dot display)

For some measurements, the tabletop is moved automatically.

3

MR system components

60

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments