manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 119 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 119

4

Use a dampened cloth for cleaning.

Do not submerge the receptors in cleaning liquid.

5

Disinfect the receptors with a commercially available disinfecting
agent. Follow the manufacturer’s instructions.

Disinfecting system components

Disinfecting sprays damage electronic components. For this
reason, components may only be cleaned with a semi-dry cloth.

WARNING

Flammable cleaning or disinfection agents may cause fire or
explosion!

Injury to patient

◆

Disinfect the system components with commercial
disinfecting materials. However, do not use solutions with
alcohol or acetone. Follow manufacturer’s instructions.

Siemens does not test alcohol-containing, phenol-alkaline and
alkaline-based disinfectants for harmful effects on surfaces.
Avoid disinfecting system components with these materials.

Care and cleaning of floors

Do not use the following cleaning or care products:

◾

Sprays

◾

Silicon-based cleaning or care products

◾

Cleaning or care products with substances that release ammonia

◾

Cleaning or care products that destroy the anti-static properties of
the floor covering

6.1.7

6.1.8

Maintenance

6

MAGNETOM Skyra

fit

 | syngo MR E11

119

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments