Specifications
Technical data
8
88 | 94
Building Technologies
A6V10209291_h_en_--
Fire Safety
2016-03-03
8 Specifications
Unless otherwise mentioned, the following data applies:
Temperature
= 25 °C
Air pressure
= 1000 hPa (750 Torr)
8.1 Technical data
You will find information on approvals, CE marking, and the relevant EU directives
for this device (these devices) in the following document(s); see 'Applicable
documents' chapter:
Document A6V10217810
Detector line
Operating voltage (modulated)
DC 12…33 V
Operating current (quiescent)
Typ. 320…400 A
Maximum current connection factor 2
Quiescent current connection factor 2
Address connection factor
1
Separator connector factor
1
Communication protocol
FDnet
Compatibility
See 'List of compatibility'
Line separator
Line voltage:
Nominal
DC 32 V (= V
nom
)
Minimum
DC 12 V (= V
min
)
Maximum
DC 33 V (= V
max
)
Voltage at which the line separator
opens:
Minimum
DC 7.5 V (= V
SO min
)
Maximum
DC 10.5 V (= V
SO max
)
Permanent current when switches are
closed
Max. 1.5 A (= I
C max
)
Switching current (e.g., in the event of
a short-circuit)
Max. 2 A (= I
S max
)
Leakage current when switches are
open
Max. 1 mA (= I
L max
)
Serial impedance when switches are
closed
Max. 0.4 (= Z
C max
)
The line separator is closed via an actuation signal from the control panel.
Required line voltage: DC 12...33 V (normal range)
