manualshive.com logo in svg

Siemens 7ME305, Operating Instructions Manual, Page: 44 / 124

Share
Download
Siemens 7ME305 Operating Instructions Manual Download Page 44

When switching between different units a rounding-off may need to be corrected manually.  

Note

If the   or   keys are operated permanently (finger left on the glass panel), the numeric value 
or setting option is changed continuously in tabular selection.

If an accidentally changed setting is wrong, it is possible to exit the menu item by pressing the   
key several times (return to the menu one level up).

6.3.4

Write protection

Programming of the device by unauthorized persons can be prevented by using a personal, 
freely selectable code (not "0") in the operating and display panel. Device functions and 
parameters can then only be changed after entering the code. The personal code is set in the 
menu 6.2 Customer code.

If the   and   keys are actuated in the parameter setting level, the request to enter the code 
appears in the display. For free access, it is also possible to enter the code once in menu 6.1 Enter 
code.

The programming is disabled again:

• After returning to the display mode

• About 10 minutes after actuating the last optical keypad

• After entering any number, not the personal code, in menu 6.1 Enter code

Note

The programming is permanently enabled with code = 0 (factory setting).

See also

The exact structure of the operating menu is explained in the appendix HMI menu structure 
(Page 105). The main functions are described in Functions (Page 51). 

6.3.5

Operating examples

The operating paths to be followed are represented in each diagram.

The optical keypads to be actuated are specified and the individual operating steps numbered 
consecutively.

Commissioning
6.3 Commissioning via local user interface

SITRANS FUS060 with PROFIBUS PA

44

Operating Instructions, 09/2021, A5E02225054-AD

Summary of Contents for 7ME305





























































































































Reviews:

No comments