Installation and operating instructions
MSA400 smart
05.2017
3
1. General information
Please read these installation and operating instructions carefully and in full before commissioning
the MSA400 smart sliding system.
1.1 Target group of this documentation
• This documentation is intended for use by specialists and end users.
• All instructions concerning installation, commissioning, repairs and maintenance described in this document are to be
performed exclusively by electricians with training and practice in the installation, commissioning and maintenance of
mechanical drives.
• All instructions on operation and maintenance described here are intended for end users.
• Following installation, the installation company must hand over the installation and operating instructions to the end user
and brief the user/owner of the building accordingly.
1.2 Intended use
• The MSA400 smart is an electric motor-driven system for opening and closing windows/patio doors with sliding
hardware (sliding elements). It has a maximum displacement force of 50 N (or 90 N on application of a light curtain)
and a travel range of up to 8 m, and it may only be installed in elements which are compatible with these specifications:
Scheme A
Scheme G2
Scheme E
max. 250 kg per sash
Scheme K
Scheme G
• The standard MSA400 smart system is not suitable for use in swimming pools and/or damp rooms. Special designs are
possible and permitted only upon request and after having been tested by SIEGENIA.
• The MSA400 smart must only be operated with hardware components and genuine accessories from SIEGENIA.
• It must be possible to access and disassemble the slide drive SA at all times should maintenance and service work be
required (curtain rods, lamps, ceiling covers, roller shutter housings, etc. must not hinder removal).
• The instructions contained in ASR A 1.6, VFF data sheet KB.01 as well as EN 12453 for power-operated windows, doors
and gates must be observed!
• If you are using the system for commercial purposes, you must also observe the safety instructions of your accident
insurance provider.
• Following installation of the MSA400 smart, you must carry out a reference run as well as a calibration and teach-in run
when the unit is commissioned for the first time.
1.3 Incorrect use
• Sliding elements equipped with the MSA400 smart slide system may not be used as escape doors in the event of a fire.
• Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product
and its associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited.
SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this
stipulation.
1.4 Dimensions
• All the dimensions in this documentation are specified in mm.
