background image

4

MSA400 smart 

Installation and operating instructions

05.2017

2. Safety notes

Risk of injury or fatal injury. Hands, arms, legs and feet can get trapped and/or crushed in systems 

driven by an electric motor.

•  Make sure that no parts of the body or objects are within the shearing and locking area of the system.
•  Ensure that no body parts or objects are under the sliding sash, especially when lowering sliding elements.
•  This unit can be used by children aged 8 and above as well as by people with physical, sensory or mental difficulties or 

with a lack of experience and knowledge as long as they are supervised or have been instructed in how to use the unit 
safely and understand the resulting risks. Children must not play with the unit. Cleaning and user maintenance must not be 
carried out by children without supervision.

Risk of injury or death due to electrical shock or fire. Systems driven by an electric motor can 

overheat and cause fire.

•  Insert the Euro mains plug of the standard connecting cable only into a suitable 230 V AC mains power supply socket.
•  Only a qualified electrician may perform any work on the 230 V AC mains power supply.
•  Current local regulations (such as VDE 0100 of the VDE in Germany) must be observed.
•  Relevant country-specific regulations must be strictly followed for all work on the voltage supply system or building wiring 

system.

•  All-pole safety isolation is required when the mains cable is laid on-site because the power supply does not have a 

separate line disconnector.

•  Connect in-wall supply lines to the MSA400 smart sliding system in branch boxes. These branch boxes must be kept 

accessible for maintenance.

•  When cleaning the sliding sash and the drives, make sure that no liquid gets inside the MSA400 smart system as this 

could damage the electronics.

•  The unit must be checked by a specialist in the event of a fault.
•  Should a solid object or any liquid get inside the unit, stop operation immediately and disconnect the MSA400 smart 

system from the mains. Then have the MSA400 smart system checked and repaired by qualified specialists only.

•  If the network connection cable is damaged, it may only be replaced by SIEGENIA, its customer service department or 

an electrician.

Injuries caused by falling objects.

•  Please do not put or place objects on top of the MSA400 smart.

Hazard due to third party attacks on SIEGENIA WLAN devices! Please observe the following notes 

to protect your system against attacks by third parties:

•  Every SIEGENIA WLAN device is protected by two passwords (user and administrator). It is essential that you change 

these passwords after the initial setup. Do not leave in the default setting.

•  If the SIEGENIA WLAN devices are integrated in your home WLAN, this must be encrypted for operation.
•  Please choose secure passwords consisting of lower case and capital letters, numbers and special symbols.

Summary of Contents for Drive Series





























Reviews: