background image

26

MSA400 smart 

Installation and operating instructions

05.2017

16. Information concerning product liability

16.1 Intended use

Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product and its 
associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited. SIEGENIA 
accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this stipulation.

16.2 Product liability

Our products are guaranteed – subject to correct installation and proper use – for a period of one year from the date of receipt 
by a company (according to our general terms and conditions) or as otherwise agreed, and for a period of two years for end 
consumers, in accordance with statutory provisions. As part of our ongoing improvements, we reserve the right to replace 
individual components or entire products. Consequential losses resulting from defects are excluded from the warranty within the 
limits of the law. The warranty shall become void if modifications that are not authorised by us or have not been described in this 
documentation are performed on the product and/or individual components, or if the product and/or individual components 
is/are dismantled or (partly) dismantled, and the defect is due to the changes made.

16.3 Disclaimer of liability

The product and its components are subject to stringent quality controls. As a result, they function reliably and safely when 
used correctly. 
Our liability for consequential losses and/or claims for damages is excluded, except in the case of wilful misconduct or gross 
negligence, or where we are responsible for injury to life, physical injury or damage to health. Strict liability under the 
German Product Liability Act (Produkthaftungsgesetz) remains unaffected. Liability for the culpable violation of significant 
contractual obligations also remains unaffected; liability in this case is limited to losses that are specific to the contract and 
that could have been foreseen. The above regulations do not imply a change in the burden of proof to the detriment of the 
consumer.

16.4 Environmental protection

Although our products do not fall within the scope of the German Electrical and Electronic Equipment Act, SIEGENIA will 
continue to meet the requirements of this Act and will endeavour to completely eliminate the use of substances that are 
hazardous to the environment as soon as this becomes technically feasible.  
Electrical products should not be disposed of as household waste.

17. Feedback on documentation

We welcome your comments and suggestions on how to improve our documentation. Please email your comments to documen-
[email protected].

Summary of Contents for Drive Series





























Reviews: