Installation and operating instructions
MSA400 smart
05.2017
11
Assembly option 2 – concealed mains cable running
The customer-side concealed routing of the mains cable for the slide drive SA and the connection of the slide drive SA, this
work must be carried out by a qualified electrician. In the case of mains cable running for sliding elements which have not yet
been installed (e.g. new build and renovation projects), a flexible cable (5 x 1.5 mm
2
incl. connection) for wall and key
switches must be provided by the customer and fed concealed through the top section of the lift & slide frame (fig. 3).
3
Holes for the cable inlet and outlet (each approx. Ø 10 mm) must be made for this purpose, with the centre of each hole
being positioned approx. 7 mm away from the inside frame edge (Fig. 4). All-pole safety isolation is required if the customer
is routing the mains cable. The isolated end of the mains cable must be located inside the power supply housing. The
connection to the slide drive is made in accordance with the wiring diagrams. The mounting angle of the slide drive SA
contains a sufficiently dimensioned recess for the cable outlet on the frame profile (fig. 5). Concealed mains cable fitting to
the slide drive SA is through the top edge of the frame on the locking side. Concealed mains cable fitting to the slide drive SA
is through the top edge of the frame on the locking side.
5
4
Y
7 mm
Inside frame
edge
Bottom edge of lift & slide frame (without cover)
Dimension Y = 15 mm for timber and PVC elements
Dimension Y = central in relation to hollow section in the
case of aluminium elements
Mains cable outlet Ø 10 mm
(drill and deburr)
Recess in
mounting angle
Mains cable
inlet
Ø 10 mm
