Installation and operating instructions
MSA400 smart
05.2017
15
7.6 Concealed mains cable running and connection
7.6.1 Concealed routing and connection to the power supply for slide drive SA
Important note:
If the customer is responsible for routing the flexible mains cable (5 x 1.5 mm
2
) for the slide drive SA and
the connection in the power supply of the slide drive SA, this work must be carried out by a qualified electrician.
Risk of overheating!
Risk of electrical shock!
›
Prior to installation, you must disconnect the mains cable from the AC mains power supply or disconnect the mains fuses.
With concealed mains cable running and for control using a wall or key switch (not included in scope of delivery), the cable
must be connected in the power supply of the slide drive SA.
1. Unscrew the fixing screws on the power supply cover and remove the power supply cover.
2. Release cover clip
3. Disassemble and remove the plug cable that comes standard in the power supply.
4. Run the concealed mains cable through the cable outlet in the mounting angle and into the power supply housing; the
jacket on the mains cable must extend into the power supply housing.
5. Strip the insulation from the mains cable within the power supply housing
6. Reattach the power supply cover using the fixing screws
7. Secure the mains cable with cover clips
1
2
3
Power supply cover
Cover clip
Run the concealed mains cable
through the cable outlet and into
the power supply housing
Disassemble and remove
plug cable
