![background image](http://html1.mh-extra.com/html/sick/rfh620-1001201s01/rfh620-1001201s01_operating-instructions-manual_1264557019.webp)
Chapter
10
Operating Instructions
Radio Frequency Identification RFH620 Interrogator
20
8013171/ZO93/2017-08-08
©
SICK AG
•
Germany
•
All rights reserved
Appendi
x
3.5.5 Reading operation mode (object related)
There is only one object in the reading field during start/stop operation, i.e. all the read
data should be unambiguously assigned to the object. The start and stop of the reading
process control one/two reading pulse sensors at the beginning and at the end of the
reading field as standard. The distance between each sensor is determined by the size of
the reading field. The reading process can be alternatively controlled with command
strings via the data interface. The output of the reading results is carried out either at the
end of the reading pulse (the rear edge of the object has left the end of the reading field)
or during the reading pulse if certain configurable conditions have been fulfilled.
Figure 3-8: reading operation mode for the RHF620 in stand-alone operation
The reading operation mode can be configured using the SOPAS-ET configuration
software: PROJECT TREE, RFH620, PARAMETER, DATA PROCESSING, register
tab TRACKING
3.5.6 Data Processing
The output time in the reading process with regard to the reading pulse start can be
configured using the SOPAS-ET configuration software: PROJECT TREE, RFH620,
PARAMETER, DATA PROCESSING, OUTPUT CONTROL
Furthermore, the evaluation conditions and filters and sorters for data output to the host
computer can be configured: PROJECT TREE, RFH620, PARAMETER, DATA
PROCESSING, EVALUATION CONDITION
PROJECT TREE, RFH620, PARAMETER, DATA PROCESSING, FILTER/SORTER
FOR OUTPUT