Chapter
2
Operating Instructions
Radio Frequency Identification RFI341 Interrogator
10
8013171/ZO93/2017-08-08
© SICK AG • Germany • All rights reserved • Subject to change without notice
Safety Information
2
Safety Information
This chapter deals with your safety and operator safety in the operational area.
¾
Read this chapter carefully before using the RFID device.
2.1
Authorised User
For correct and safe functioning, the RFID device must be installed, operated and
maintained by sufficiently qualified staff.
Repairs to the RFID device should only be carried out by qualified and authorised SICK
service staff.
¾
The operating instructions should be made available to the end user.
¾
The end user should be briefed and urged to read the operating instructions by the
technicians.
The following qualifications are required for different activities:
Task
Qualification
Installation,
maintenance
¾
Practical technical training
¾
Knowledge of current health and safety regulations at
the workplace
Electrical installation,
device replacement
¾
Practical electrical training
¾
Knowledge of current electrical safety regulations
¾
Knowledge of start-up and operation of the device in
each operational
¾
area (e. g. conveyor system)
Startup, configuration
¾
Basic knowledge of the Windows
TM
operating system
¾
Basic knowledge of designing and setting up
(addressing) Ethernet
¾
connections for connecting the bar code system to the
Ethernet
¾
Basic knowledge of working with an HTML browser (e.
g. Internet Explorer
TM
) for using the online help
¾
Basic knowledge of data transfer
¾
Basic knowledge of bar code technology
Operation of the device
in each operational area
¾
Knowledge of start-up and operation of the device in
each operational area (e. g. conveyor system)
¾
Knowledge of the software and hardware environment
in each operational area (e. g. conveyor system)
Table 2-1 Required qualification for starting up the RFH620
