Chapter
2
Operating Instructions
Radio Frequency Identification RFI341 Interrogator
12
8013171/ZO93/2017-08-08
© SICK AG • Germany • All rights reserved • Subject to change without notice
Safety Information
2.2
General Safety Instructions and Protective Measures
Read carefully the general safety instructions and observe them at all times. This also
applies to the warnings provided for the activities described in each chapter of this
document.
2.3
Quick stop and quick restart
The RFH620 can be switched on or off using the main switch for connection modules
CDB620 or CDM420.
3.1.1
2.3.1 Switching off the RFH620
¾
Switch off the power supply to the RFH620 (the connection module)
- or -
¾
Remove (pull out) the 15-pole D-Sub-HD connector of the RFID device
When the RFH620 is switched off, the following data is lost:
¾
Application-specific parameter sets in the bar code scanner that were only saved
temporarily in the device
¾
The last reading result of the bar code scanner
¾
Daily operating hours counter of the RFH620
3.1.2
2.3.2 Switching the RFH620 back on
¾
Switch on the power supply to the RFH620 (the connection module) back on
- or -
¾
Connect the 15-pole D-Sub-HD connector of the RFH620
The RFH620 starts up using the most recent
permanently
saved configuration. The
daily operating hours counter is reset.
2.4
Environmental Conditions
The RFI341 is designed to cause minimum impact to the environment.