![background image](http://html1.mh-extra.com/html/sick/rfh620-1001201s01/rfh620-1001201s01_operating-instructions-manual_1264557024.webp)
Operating Instructions
Chapter
10
RFI341
8013171/ZO93/2017-08-08
©
SICK AG
•
Germany
•
All rights reserved
25
Appendi
x
4.2.2 Accessories
The following accessories are not included in the delivery of the RFH620. They have to
be ordered separately and placed ready for installation:
¾
Mounting device, see next chapter
¾
Power supply
¾
Ethernet Cable
4.2.3 Mounting device
The RFH620 is fixed using blind hole taps (M6) that are each located on the narrow
sides of the device (chapter RFH620 dimensional drawings).
The RFID device can be mounted using the following SICK holders:
¾
Bracket no. 4057051 (set with screws No. 2048551)
Table 4-1: Example: Fixing the RFH620 with the angle with adapter plate no. 2048551
The dimensioning of the SICK-holders is shown in chapter “Dimensional drawing
accessories”.
Alternatively, the user can provide a holder. The holder should meet the following
requirements:
¾
Stable mounting device
¾
Adjustable alignment of the RFH620 in the x and y axis
¾
The mounting device must be able to bear the weight of the RFID device including
its connection cable (depending on the device version) without vibrating.
¾
Two M6 bolts to fix the RFH620.
¾
The screw length depends on the thickness of the mounting device.
¾
The maximum thread reach in the RFH620 is 6 mm (0.2 in) from the housing
surface.