![background image](http://html.mh-extra.com/html/sick/mcs200hw-mp/mcs200hw-mp_operating-instructions-manual_1264205011.webp)
Symbol
Significance
Warning for hazard through hot surfaces
If you need to work on a subassembly marked with such a symbol:
b
Read the relevant Section in these Operating Instructions
b
Observe all the safety information in the relevant Section
2.3
Intended use
The MCS200HW-MP is a multicomponent analysis system for continuous flue gas
monitoring of industrial combustion plants (emission measuring system). The sample
gas is extracted at the measuring point and fed through the analysis system (extractive
measurement).
The analysis system is designed for indoor installation.
b
Refer to the system documentation delivered for information on the device equip‐
ment.
2.4
Requirements on the personnel's qualification
Table 4: Qualification requirements
Tasks
User groups
Qualifications
Installation
Qualified personnel
•
General knowledge in
measurement technology,
specialist device knowledge
(possibly customer training
at SICK)
Electrical Installation
Qualified personnel
•
Authorized electrician
(authorized skilled electri‐
cian or person with similar
training)
•
General knowledge in
measurement technology,
specialist device knowledge
(possibly customer training
at SICK)
Initial commissioning
Authorized operator
Ü
•
General knowledge in
measurement technology,
specialist device knowledge
(possibly customer training
at SICK)
Recommissioning
Decommissioning
•
Operator / system integra‐
tor
•
Authorized operator
Ü
•
General knowledge in
measurement technology,
specialist device knowledge
(possibly customer training
at SICK)
•
Authorized electrician
(authorized skilled electri‐
cian or person with similar
training)
•
Service training
Operation
Troubleshooting
SAFETY INFORMATION
2
8026608/AE00/V1-0/2021-10 | SICK
O P E R A T I N G I N S T R U C T I O N S | MCS200HW-MP
11
Subject to change without notice