![background image](http://html.mh-extra.com/html/sick/mcs200hw-mp/mcs200hw-mp_operating-instructions-manual_1264205029.webp)
Important information
NOTICE
•
Install an external power disconnection unit which disconnects all connectors and
fuses near the analyzer.
•
The power disconnection unit must be marked clearly and be easily accessible.
•
The onsite wiring system to the power source of the system must be installed and
fused according to the relevant regulations.
•
Always connect a protective ground to PE.
Procedure
1.
Connect the electric lines.
6.6
Performing a high voltage test
Overview
UPS
Figure 9: Power supply connections
Procedure
1.
To avoid erroneous measurements during a high-voltage test, the bridges descri‐
bed in Figure
must be removed.
2.
Insert the bridges again after the high-voltage test.
ELECTRICAL INSTALLATION
6
8026608/AE00/V1-0/2021-10 | SICK
O P E R A T I N G I N S T R U C T I O N S | MCS200HW-MP
29
Subject to change without notice