![background image](http://html.mh-extra.com/html/sick/mcs200hw-mp/mcs200hw-mp_operating-instructions-manual_1264205020.webp)
5.4
Installation sequence
5.4.1
Wall mounting
Overview
23
1
.8
4
7
1
.8
2
3
598
666
Prerequisites
•
Observe clearances for the heated sample gas line.
•
Observe clearances for incoming and outgoing lines (approx. 20 cm clearance at
the top, bottom, side of the measuring device).
•
Observe clearances for maintenance work.
•
Ensure the mounting location has sufficient load-bearing capacity.
•
Observe relevant ambient conditions.
Procedure
1.
Mount installation plate with 4 screws (optionally M8, M10 or M12 screws with
strength 8.8 or higher) on the wall.
Use at least 2 screws at the top and 2 screws at the bottom of the installation
plate.
Related topics
•
see "Ambient conditions", page 56
•
see "Dimensional drawings", page 54
5
MOUNTING
20
O P E R A T I N G I N S T R U C T I O N S | MCS200HW-MP
8026608/AE00/V1-0/2021-10 | SICK
Subject to change without notice