SICK GM32 EX, Operating Instructions Manual

Page: 68 / 112

8.3.4.1 Diagnosis
The “Diagnosis” menu shows the current error messages.
the following information is available for troubleshooting:
• The GM32 signals a malfunction or an unsafe operational state with status signals
(option). See electrical connection diagram.
• Logbook: Access to the logbook via SOPAS ET, see "SOPAS ET (PC program)",
page 17 .
• List of error messages and measures for clearing malfunctions, see "Error mes‐
sages" .
Status messages, status indicators and system states
Status LED Significance Measured
value dis‐
play Analog out‐
puts
1
Status sig‐
nal
2,3
Power on
(power volt‐
age on) Power supply in order. --
Uncertain
Measured
value
blinks
Measured value uncertain (e.g. outside calibration
range)
Cause: Press the DIAG button
All messages in the SOPAS ET logbook.
Clearing malfunctions,
see "Error messages" .
Current According to
setting
Maintenance
request
(mainte‐
nance
request mes‐
sage) • Irregularities (e.g. gas temperature too high, devi‐
ation from check cycle too high) that require a
review of the cause.
• The measured values are valid.
• Press the DIAG button: Error display
• All messages in the SOPAS ET logbook
• Clearing malfunctions, see "Error messages" .
Failure • Device failure (e.g. lamp failed).
• Cause: Press the DIAG button.
• All messages in the SOPAS ET logbook.
• Clearing malfunctions, see "Error messages" .
Last valid measured value
held
1 Option
2 Option. Refer to the delivered System Documentation for the assignment of the status outputs.
3 See SOPAS ET in the “Digital outputs” menu.
8.3.4.2 Check cycle - results of last check cycle
NOTE
The results of the last check cycle can be called up in this menu item.
8
OPERATION
68 O P E R A T I N G I N S T R U C T I O N S | GM32-Ex 8015558/YYJ8/V1.7/2016-07 | SICK
Subject to change without notice