Replacing the sender lamp
2
3
5
5
1
4
4
Figure 40: Replacing the sender lamp
1
Plug screw
2
Sender lamp
3
Tube
4
Tube screw fitting
5
Sender lamp screws
4
Loosen screw (crosshead) of the plug and disconnect the plug.
5
Loosen 2 screws of the sender lamp with an Allen key.
6
Take off the sender lamp. Pull out lamp slightly to the rear.
7
Push blue ring on both hose fittings and pull off hose.
8
Remove the cap from the new sender lamp.
9
Plug in the two tube ends to the hose fittings.
10 Plug in new sender lamp and screw tight.
11 Connect the plug and screw tight.
12 Plug in the lamp cover.
13 Screw the rear cover tight.
NOTE
Adjustment is not required.
MAINTENANCE
9
8015558/YYJ8/V1.7/2016-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | GM32-Ex
81
Subject to change without notice
