SICK GM32 EX, Operating Instructions Manual

Page: 52 / 112

7.3 Overview of start-up steps
Step Procedure Reference
1 Removing the transport safety devices. see "Transport safety device", page 25 .
2 Installing the device flanges on the purge
air fixture. see "Installing the device flange on the
purge air fixture", page 53
.
3 Aligning the measuring probe. see "Aligning the measuring probe in flow
direction", page 54
.
5 Connecting the protective gas. see "Connecting protective gas to the SR-
unit", page 54
.
6 Connecting the potential equalization. see "Connecting the potential equalization
to the SR-unit", page 45
, see "Connecting
the potential equalization", page 44 .
7 Electrical connection of SR-unit. see "Electrical connection of SR-unit",
page 44
.
8 GMP probe: Start-up of the purge air sup‐
ply. see "Start-up of the purge air supply",
page 55
.
9 Installing the SR-unit on the device flange. see "Installing the SR-unit on the device
flange", page 59
.
10 Performing the optical fine alignment of
the SR-unit. see "Optical fine alignment of the SR-unit ",
page 60
.
11 Installing weatherproof covers (option). see "Installing weatherproof covers
(option)", page 61
.
7
COMMISSIONING
52 O P E R A T I N G I N S T R U C T I O N S | GM32-Ex 8015558/YYJ8/V1.7/2016-07 | SICK
Subject to change without notice