Operating instructions Distance sensors Dx35
Commissioning
30
© SICK AG • Subject to change without notice • 8014868/YEF7/2014-09-02
near < far
(continued)
5. Position object at teach point
2
.
6. Press the
select
pushbutton. The
Q1 far
LED lights up.
Press the
set
pushbutton.
If the teach was successful, the setting is applied immediately.
The
Q1
and
Q2
LEDs flash twice simultaneously. If the teach was not
successful, the
Q1
and
Q2
LEDs flash alternately.
7.
If necessary, perform fine teach.
→
See Page 34, Chapter 8.3.
8.
In order to leave teach mode, either press and hold the
select
pushbutton longer than 5 seconds or wait 5 minutes without pressing
the pushbuttons.
far < near
(inverted behavior)
Dx
35
Min
Max
1
1
0
2
Fig. 12: Setting switching points for window (inverted behavior)
1
Teach point far, position
1
2
Teach point near, position
2
