Operating instructions Distance sensors Dx35
Safety
12
© SICK AG • Subject to change without notice • 8014868/YEF7/2014-09-02
2.3
Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training!
Improper handling may result in considerable personal
injury and material damage.
For this reason:
• All activities should always be performed only by
designated persons.
These operating instructions list the training requirements for the various
fields of activity, as follows:
•
Skilled personnel
Due to their specialized training, skills, and experience, as well as
their knowledge of the relevant regulations, such persons are able to
perform tasks delegated to them and detect any potential dangers
independently.
•
Electricians
Due to their specialized training, skills, and experience, as well as their
knowledge of the relevant standards and provisions, such persons are
able to perform work on electrical systems and detect any potential
dangers independently.
In Germany, electricians must meet the specifications of the BGV
A3 Work Safety Regulations (e.g., Master Electrician). Other relevant
regulations applicable in other countries must be observed.
2.4
Warning symbol on the device
Laser class 2
Distance sensors designated as laser class 2 include the following warning
label.
LASER APERTURE
MAX. OUTPUT ≤ 250mW
PULSE LENGHT = 4ns
WAVELENGHT = 658nm
EN/IEC 60825-1:2014
Complies with 21 CFR
1040.10 and 1040.11
except for deviations
pursuant to laser notice
No. 50, dated June 24, 2007
LASER
2
• DT35-B15251
• DS35-B15221
Fig. 1: Warning symbol on sensor having class 2 laser
CAUTION LASER RADIATION
Do not look into the beam.
Class 2 laser product
