Sibelmed DATOSPIR MICRO A User Manual Download Page 48

Page: 48 / 221

Chapter

2: Model A Operating

DATOSPIR MICRO User’s Manual

511-A00-MU2 • REV. 2.06

FVC X.XX YY%

FEV1: x.xx yy%

X.XX: Observed Value of the parameter, in this case FVC.

YY: % between the Observed value and the value of

Reference.

x.xx: Observed Value of the parameter, in this case FEV1.

yy: % between the Observed value and the value of

Reference.

ATTENTION: Check in the Customisation Programme that

the REFERENCES and the ETHNIC FACTOR are suitably

selected. The ethnic factor modifies the value of the

References according to the percentage selected. 100%

is equivalent to the unmodified standard value of the

References.

Using the selection keys or it is

possible to view the observed value and the percentage in relation

to the value of reference for each customised parameter.

If a parameter does not have a Value of Reference, the

corresponding percentage will not appear.

Press the

key again and complete a new

manoeuvre. As many manoeuvres as required can be completed.

The DATOSPIR MICRO will always save the five best for FVC and

VC and the three best for MVV, according to ATS/ERS criteria

(*).

No more than eight manoeuvres should be made so as not to

tire the patient.

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 48 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: