Sibelmed DATOSPIR MICRO A User Manual Download Page 104

Page: 104 / 221

Chapter

3: Models B and C Operation

DATOSPIR MICRO User’s Manual

104

511-A00-MU2 • REV. 2.06

SPIROMETRY CUSTOMISATION

This option customises any suboptions specific to the spirometric

tests

Parameters of Reference

Allows selecting among several

Selects for children and adults

Prioritises the age range selected for adults

if a different table is chosen for children.

Extrapolates the values for the ages outside

the selected table range.

Observed Parameters

Allows for the observed parameters or

measured parameters you want to use to be selected.

This is only at display level or for the report. All the

parameters are saved on the database and can be

enabled at any time.

Selecting the graph type

Diagnosis Selection according to:

Miller Quadrant

Snider, Kory & Lyons Algorithm

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 104 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: