Sibelmed DATOSPIR MICRO A User Manual Download Page 29

Page: 29 / 221

Chapter 1:

Instructions for Use and Installation

DATOSPIR MICRO User’s Manual

511-A00-MU2 • REV. 2.06

See section 2.12 / 3.13 PATIENT MODE OPERATION.

The equipment is very simple and easy to handle, presenting the

measured value of PEF, FEV1 or FVC in a colour range of Green,

Yellow and Red (semaphore), as programmed.

Spirometer operations by patients are saved in an internal

database and subsequently transferred to the PC database for

data analysis and storage.

HOSPITAL MODE

This option means that the DATOSPIR MICRO can be used as

a sophisticated spirometer with the following functions:

• Spirometry

. Patient Details (Reference, Age, Weight, Height, Sex, Index

Smoker)

. Atmospheric Conditions (Temperature, Pressure, Humidity)

. Tests (FVC, VC, MVV , Bronchial Dilation)

. Report

• Customisation (selectable options)

. Spirometry (References/Parameters/Graphs/Diagnosis/

Dilation Modes/Warnings)

. Patient mode (Patient details / test data)

. Printers

. Standard curves (Retrieve standard / modify standard)

. Battery

. Language

. Set clock (Time / Date)

• Calibration

• Internal

Database to save tests with alphanumeric and

graphical data (depending on model).

• Maintenance

. Warnings

. LCD contrast

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 29 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: