Sibelmed DATOSPIR MICRO A User Manual Download Page 120

Page: 120 / 221

Chapter

3: Models B and C Operation

DATOSPIR MICRO User’s Manual

120

511-A00-MU2 • REV. 2.06

DISPLAYING RESULTS

Press the parameter area. The data on the selected manoeuvre

will be displayed (M1 by default).

Go back to the previous screen

Change manoeuvre

Display the diagnosis of the selected manoeuvre

Print the report on the selected manoeuvre

Save the selected manoeuvre in the database

or Display the remaining parameters, if selected

• The screen displays the values of Reference, the Observed

values and the % between both parameters selected in the

Customisation Programme. If an * appears after the REF test,

this means that the values of reference have been extrapolated.

• It also displays:

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 120 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: