Sibelmed DATOSPIR MICRO A User Manual Download Page 154

Page: 154 / 221

Chapter

3: Models B and C Operation

DATOSPIR MICRO User’s Manual

154

511-A00-MU2 • REV. 2.06

Go back to the previous screen

Distributor details

Check the external printer selected.

The SIBELMED logo, the heading lines

and 10 lines of characters will be printed.

Check that the automatic on and off work

properly. Upon selecting this option, the equipment

switches off and on automatically after 5 seconds.

Display the values of different variables (No.

pulses, Turbine Fct, Alk. B., Li. B., etc.). This

indicates whether the read value is correct.

CPU check.

This calculates the Flash programme checksum and

the Bios programme checksum. It also indicates whether there

are errors in the RAM memory of the CPU and in the external

RAM.

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 154 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: