Sibelmed DATOSPIR MICRO A User Manual Download Page 41

Page: 41 / 221

Chapter

2: Model A Operating

DATOSPIR MICRO User’s Manual

511-A00-MU2 • REV. 2.06

2.4 FORCED VITAL CAPACITY «FVC» TEST

PROCEDURE

The procedures to be completed to carry out the Forced Vital

Capacity «FVC», slow Vital Capacity «VC» and Maximum

Voluntary Ventilation «MVV» tests are very similar. Therefore,

only one detailed description will be given in this section.

ENTERING PATIENT PARAMETERS

Start the DATOSPIR MICRO using the key and

wait for the following screen to appear:

MAIN

Spirometry

Press the key and the following will appear:

SPIROMETRY

FVC

Press the key and the following will appear:

PATIENT

DETAILS

Code:

0000000000

Enter the patient code (between 0 and 9999999999).

Summary of Contents for DATOSPIR MICRO A






























































































































































































































Search results

Summary of Contents for DATOSPIR MICRO A

Reviews:

Sibelmed DATOSPIR MICRO A, User Manual, Page: 41 / 221

Search results

Summary of Contents for DATOSPIR MICRO A

Reviews: