Sibelmed DATOSPIR MICRO A, User Manual, Page: 28 / 221

Chapter 1:
Instructions for Use and Installation
DATOSPIR MICRO User’s Manual 28
511-A00-MU2 • REV. 2.06
NOTE:
The first time the equipment is started, the protection is
disabled and the PIN is set to 0000. See Section 2.2/3.2
EQUIPMENT CUSTOMISATION to enable it and configure
the PIN.
HANDLING THE EQUIPMENT
The spirometer has been developed to make it user-friendly,
so that it is easy and simple to use. The equipment may seem
difficult to handle, given its multiple functions, although its design
and use will quickly show you that it is truly easy and intuitive
for any medical staff.
All functions are accessible from the 4 silicon keys located
underneath the screen (Model A) or using the icons on the screen
that can be selected using a pointer (Models B and C ).
All models can be connected as standard or optionally to an
external printer, where this has been previously selected in the
Customisation option. In this case, following the instructions of
the corresponding printer.
1.6 OPERATING MODES
The DATOSPIR MICRO spirometer has two operating modes:
• PATIENT Mode
• HOSPITAL Mode
Each one is selected from the main screen.
PATIENT MODE
This operating mode means that the DATOSPIR MICRO can be
programmed to control asthmatic patients.