ShoreTel SA-100, Installation Manual

Page: 80 / 84

SA-100 Planning, Installation, and Administration Guide Chapter 9: Backup and Restore
80
NOTE
The SA-100 can generate more than 1GB of data files per day and easily have
more than 100GB stored internally.
To configure the SA-100 to perform automatic backups using an FTP server, do the
following:
Requirements:
•
Make sure that the FTP server is configured to allow the SA-100 to access and
write to it.
•
Make sure that port 21 is open and available on the FTP server for the SA-100 to
use.
Note
Port 21 is often blocked.
For more information about configuring automatic backup for ShoreTel services and
devices, refer to the Voicemail Model Switches section in the
ShoreTel 12: System
Administration Guide
.
Step 1
Launch ShoreWare Director.
Step 2
Select
Administration > Platform Hardware > Voice Switches / Service
Appliances > Primary
. The Primary Voice Switches/ Servic Appliance page
appears.
Step 3
In the Name column, select the SA-100 that you want to configure for
backup. The Edit Service Appliance 100 page as shown in Figure 9-1 appears.
Figure 9-1 Edit Service Appliance 100 Page
Step 4
Scroll down to the Backup section and do the following: