ShoreTel SA-100, Installation Manual

Page: 67 / 84

Chapter 7: Maintenance SA-100 Planning, Installation, and Administration Guide
ShoreTel 12.3 67
•
Conferencing:
Provides system-wide information about Web and audio
conferencing capacity.
—
In-Use:
Indicates the total number of audio and Web conference ports
currently in use.
—
Licensed Capacity:
Indicates the number of audio and Web licenses
available in your system.
—
System Capacity:
Indicates the maximum number of simultaneous audio
and Web conferences requested.
7.2 Viewing System Information
You can view information about the system configuration of your SA-100s by site.
To the system information, do the following:
Step 1
Launch ShoreWare Director with administrator privilege. The Quick
Look panel appears.
Step 2
In the Site column, select the site on which the SA-100 that you want to
view is installed. The Maintenance Switches and Service Appliance
Summary panel appears as shown in Figure 7-2.
Figure 7-2 Maintenance Switches Summary panel
The columns on the Maintenance - Voice Switches and Service Appliances Summary
panel that are relevant to the Service Appliance 100 are as follows:
•
Switch/Appliance
- the name of the Service Appliance 100.
•
Type
- the ShoreTel nomenclature (e.g SA-100 Collab).
•
IP Address
- the IP address of the SA-100.
•
MAC Address
- the ethernet address of the SA-100.
•
Comm:
This indicates the number of voice switches with which this switch is
currently communicating. This is expressed as a fraction (# switches
communicating /# total switches).
Clicking the Comm fraction takes you to the Switch Connectivity panel, which
provides more detail on each switch’s communication status. See section 7.4.2
for details.
•
Audio Ports:
The number of current audio ports in use on the SA-100.
•
Web Ports:
The number of current Web sessions in use on the SA-100.