ShoreTel SA-100 Installation Manual Download Page 40

Page: 40 / 84

SA-100 Planning, Installation, and Administration Guide

Chapter 6: Configuring the SA-100

6.2

SA-100 Configuration Process

•

Configure Network Time Protocol (NTP) server. (Section 6.2.1)

Note

This step is required only for static IP or DHCP configurations.

•

Install Licenses. (Section 6.2.2)

•

Configure Conference Extension. (Section 6.2.3)

•

Turn off Port 5004. (Section 6.2.4)

•

Add SA-100 to ShoreTel Site. (Section 6.2.5)

•

Verify date and time synchronization. (Section 6.2.6)

•

Configure Backup SA-100 for Headquarters Server. (Section 6.2.6)

•

Configure System Failover Mechanism. (Section 6.2.8)

•

Configure Conference Web Page. (Section 6.2.8)

•

Configure Client Interface. (Section 6.2.9)

•

Configure HTTPS. (Section 6.2.10)

•

Create SA-100 Users. (Section 6.2.11)

•

Configure Instant Messaging. (Section 6.2.12)

6.2.1

Configure Network Time Protocol (NTP) Server

The NTP server is used to synchronize the clock on the SA-100.
The NTP server must be configured for every SA-100 in a site.

NOTE

This procedure is required only for static IP or DHCP configurations.

Step 1

In Director, click

Sites

Step 2

Under Sites, click the name of the site that includes an SA-100.
The

Edit Site

window is opened.

Step 3

Scroll down to

Network Time Protocol Server

Step 4

Enter the IP address of your NTP.

Step 5

Click

Save

Step 6

Exit Director.

Step 7

Reboot the SA-100.
The date and time on the SA-100 are synchronized with the date and time

on the NTP server.

Summary of Contents for SA-100





















































































Search results

Summary of Contents for SA-100

Reviews:

Related manuals for SA-100

Brands by name

Popular brands

ShoreTel SA-100, Installation Manual

Search results

Summary of Contents for SA-100

Reviews:

Related manuals for SA-100

Brands by name

Popular brands