Shimadzu MOC-120H, Instruction Manual

Page: 69 / 76

57
15-3 Computer Output Format
Interface type : RS232C
Numeric output format : JIS (ASCII)
Delimiter code : 0x09 (tab)
Delimiter : 0x0D (CR) + 0x0A(LF)
Title output format at time of start of measurement
(Underscore characters (i.e., ‘–’) are used below to indicate blanks (i.e., ‘20’ in hexadecimal)
_SHIMADZU-CORP” + delimiter
“_Model_:_MOC-120H” + delimiter
“_SN_:_” + “_XX” (10-byte Serial No.) + delimiter
“_ID_:_” + “_XX” (8-byte ID) + delimiter
“_Date/Time_:_” + “XX” (2-byte year) + “.” + “XX” (2-byte month) + “.” + “XX” (2-byte day) + “/” +
“XX” (2-byte hour) + “:” + “XX” (2-byte minutes) + delimiter
“_Condition_:_” + “X” (1-byte condition number) + delimiter
“_Unit_:_” + “Wet Base Moist.” or “Dry Base Moist.” or “Solid Content” + delimiter
"_Temp_mode_:_"+"Sample_plate_tem.," (Output only when 'ST' mode is selected)
Automatic operation format
“_Mode_:_Auto”
“_Setting Temp._:_” + “XXX” (3-byte temperature setting) delimiter
“_Auto Stop Cond._:_” + “X.XX” (4-byte automatic ending conditions setting) + delimiter
Timed operation format
“_Mode_:_Time”
“_Setting_Temp._:_” + “XXX” (3-byte temperature setting) + delimiter
“_Drying_Time_:_” + “XXX” (3-byte drying time setting) + delimiter
High-speed drying format
“_Mode_:_Rapid”
“_Setting_Temp._:_” + “XXX” (3-byte temperature setting) + delimiter
Automatic operation: “Auto Stop Cond._:_” + “X.XX” (4-byte automatic ending conditions
setting) + delimiter
Timed operation: “Drying Time_:_” + “XXX” (3-byte drying time setting) + delimiter
“_Delta M_:_” + “X.X” (3-byte 200°C maintenance condition setting) + delimiter
Low-speed drying format
“_Mode_:_Slow”
“_Setting Temp._:_” + “XXX” (3-byte temperature setting) + delimiter
Automatic operation: “Auto Stop Cond._:_” + “X.XX” (4-byte automatic ending conditions
setting) + delimiter
Timed operation: “Drying Time_:_” + “XXX” (3-byte drying time setting) + delimiter
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686