Shimadzu MOC-120H, Instruction Manual

Page: 44 / 76

32
How to specify the output format to be used
Display Key(s) used Operating instructions
With the display displaying the weight in grams, press the
MENU
key.
Press the
SELECT
key until the ‘OUTPUT’ menu item is displayed.
Press the
ENTER
key. This will cause control to shift to the output
settings and cause the currently selected output format to flash.
Press the
SELECT
key until the desired output format is displayed.
Pressing the
SELECT
key here causes the menu item lit up to change
from ‘TBL’ A ‘GRP’ A ‘PC’ and back to ‘TBL’ in sequence each
time the
SELECT
key is pressed. Note that here ‘TBL’ has been
selected.
When the desired output format begins flashing, press the
ENTER
key. This will cause control to shift to the specification of the
output interval and the currently specified interval flashes.
Press the
SELECT
key until the desired output interval is displayed.
Pressing the
SELECT
key here causes the menu item lit up to change
from ‘30S’ A ‘1M’ A ‘2M’ A ‘5M’ A ‘10M’ A ‘FIN’ and back to
‘30S’ in sequence each time the
SELECT
key is pressed. Note that
here an interval of ‘1M’ has been selected.
When the desired output interval flashes, press the
ENTER
key. The
next step to be performed here differs depending on the output
format specified in step
4
.
Procedure when ‘TBL’ has been selected:
The currently specified output format will be displayed and the
control will return to the format step
2
. If you wish to specify other
menu settings, press the
SELECT
key to select the desired menu. If
you wish to exit menu settings, press the
MENU
key.
Procedure when ‘GRP’ has been selected:
Control will shift to the specification of the range of data output
(described in step
8
to
B
).
Step
1
2
3
4
5
6
7
ENTER
ENTER
SELECT
MENU
MENU
SELECT
SELECT
SELECT
ENTER
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686