Shimadzu MOC-120H, Instruction Manual

Page: 49 / 76

37
9-2-6 Specifying a device ID
This section describes how to specify the device ID output when outputting data to the optional
printer or a computer. The device ID is an 8-character ID which may be set using the following
characters: digits from 0 to 9, letters from A to Z, and hyphens ‘—’.
How to specify a device ID
Display Key(s) used Operating instructions
From the weight display, press the
SELECT
key and hold the
SELECT
key
down while pressing the
MENU
key.
The first through fourth characters of the device ID will be
displayed with the first character flashing. The indicator ‘id’ will be
displayed in the center of the display.
Press the key or key to select the desired character for
the first character (i.e., a digit from 0 to 9, a letter from A to Z, or
a hyphen). Note that here the letter ‘A’ has been selected.
When the desired character is displayed, press the
ENTER
key. The
first character will be specified and the second character will flash.
Repeat steps
3
and
4
until the fourth character has been
specified. Note that here ‘ABCD’ has been specified.
When the fourth character has been specified, press the
ENTER
key.
The fifth through eighth characters of the device ID will then be
displayed with the first of these four characters flashing.
Just as with the first four characters, repeat steps
3
and
4
until
the eighth character has been specified. Note that here ‘—123’
has been specified.
When the eighth character has been specified, press the
ENTER
key.
The display will then return to the regular weight display.
Step
1
2
3
4
5
6
7
8
MENU
ENTER
ENTER
SELECT
ENTER
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686