Shimadzu EI-D1003M, Instruction Manual

Page: 117 / 123

Appendix A COMMUNICATIONS
A-26
263-13228
A
A8.
RELATION OF LOCAL MODE TO REMOTE
MODE OPERATIONS
(1) Input of front panel switch is only effective when REMOTE / LOCAL selection switch is in
"LOCAL" mode.
(2) When the selection switch is in "REMOTE" mode, "REMOTE" input signal only is effective
under initial status.
(3) When the selection switch is in "REMOTE" mode,
a. The operation mode is shifted to RS-232C ON-LINE in response to ON LINE request of
operation mode command from RS-232C communication port, only operation by the
operation request command from computer is effective.
b. The operation mode is shifted to RS-485 ON-LINE in response to ON LINE request of
operation mode command from RS-485 communication port, only operation by the
operation request command from computer is effective.
(4) RESET switch input and "RESET" signals are all-time effective.
(5) When the selection switch is shifted to "LOCAL" under ON-LINE operation mode, the
operation mode is force-shifted to LOCAL.
(6) Commands other than operation commands are all-time effective, and the power supply
unit sends back an answer message to computer. In addition, event commands are all-time
sent against event occurrence.