Shimadzu EI-D1003M, Instruction Manual

Page: 68 / 123

6.6 Software Operation
55
Power Supply Unit
INSTRUCTION MANUAL
6
Mode Operation and LCD Display Description of Display
REMOTE-
CONTROL
SIGNAL
SETTINGS “ALARM” signal setting of remote-
control signal (Note 2)
“REMOTE” signal setting of remote-
control signal (Note 2)
“STOP” signal setting of remote-
control signal (Note 2)
WARNING
OUTPUT
SETTINGS
(Note 1)
The setting changes the operation
when warnings of alarm codes 86 to
94 (See Table 7-7 "Table of
Warnings") occur, as follows:
ON: Buzzer ON, ALARM LED flashes,
Error event sent to RS-232C and
RS-485, The remote-control
connector "WARNING" signal turn
ON
OFF: Buzzer OFF, ALARM LED OFF
No error event sent to RS- 232C
and RS-485, The remote- control
connector "WARNING" signal turn
OFF
DEFAULT
SETTINGS
Select YES and press the SET key
to return all the above items to their
default settings. (Note 3)
REMOTE SIGNAL MODE
REMOTE=EI-03
+ -
REMOTE SIGNAL MODE
STOP=REMOTE ONLY
+ -
SET
SELECT
SETTINGS
REMOTE SIGNAL MODE
ALARM=EI-03
(EI-03) REMOTE SIGNAL MODE
ALARM=EI-03
SELECT
SET
SET
SET
REMOTE=EI-03
(EI-03)
SELECT
SET
STOP=REMOTE ONLY
(REMOTE ONLY )
SELECT
SET
ALARM=EI-03
(EI-03)
Press the + or - key
to select between
EI-03 or SEMI E74.
Previous Setting
REMOTE=EI-03
(EI-03)
Press the + or - key
to select between
EI-03 or SEMI E74.
Previous Setting
STOP=REMOTE ONLY
(REMOTE ONLY)
Press the + or - key
to select between remote
only or remote & RSXXX.
Previous Setting
SELECT
SET
SETTINGS
WARNING DISPLAY=ON
WARNING DISPLAY=ON
(ON)
WARNING DISPLAY=ON
(ON)
Press the + or -
key to select between
ON or OFF.
Previous Setting
SELECT
SET
SETTINGS
DEFAULT SETTINGS
DEFAULT SETTINGS
RESET SETTINGS=NO
DEFAULT SETTINGS
RESET SETTINGS=NO
Press the + or -
key to select between
NO or YES.